Technical data

27
Ehternet to DMX converters
Arnet nodes
- ArtNet nodes.
- Receives one DMX universe (LM 3R) or two DMX
universes (LM 3R2) coming from an Ethernet network.
- Fully compatible with consoles that use
ArtNet 1 and 2 protocols.
- Suitable with LM 3E unit.
- Dimensions (WxHxD): 86.3 x 42 x 67 mm.
FEATURES
LM 3R and LM 3R2 are ArtNet nodes that respectively receive one and
two DMX universes sent into an Ethernet network. Both units are com-
patible with ArtNet (1 and 2) and they can be controlled by any consoles
that use this protocol.
They are very convenient because they provide DMX signal in any parts
of an installation.
LM 3R2
LM 3R
LM 3R FRONT PANEL
It features LAN connexion, universe
and Sub-net selector and LED
light indicators for DMX signal and
Ethernet.
LM 3R REAR PANEL
DMX output (5 pin) / 1 universe.
LM 3R and LM 3R2 are A
r
two
DMX
un
i
verses sent
in
patible with ArtNet (1 and
DMX INTERFACES
CONNEXION EXAMPLE 2
LM 3R2 is connected to an Ethernet network. It receives signal coming from a DMX console with ArtNet direct
connexion. It receives two DMX universes so it can send DMX signals to two different groups of moving heads.
Generic ArtNet
console
1st DMX
universe
1st DMX
universe
LM 3 R2
2nd DMX
universe
2nd DMX
universe
LAN
ETHERNET
CONNEXION EXAMPLE 1
LM 3R is connected to an Ethernet network. It receives the signal coming from an emitter (LM 3E) and transmit it
as DMX signal to the moving heads.
1 DMX universe
1 DMX universe
LM 3 R
LAN
ETHERNET
Generic ArtNet
console
LM 3R2 REAR PANEL
Two DMX outputs (5 pin) / two
universes.
catalogo_iluminacion_2013.indd 27 09/09/2013 17:11:05