Technical data

26
LM 3E
DMX to Ethernet converter /
ArtNet server
LM 3E is a DMX to Ethernet (ArtNet) converter that sends
DMX into an existing Ethernet network using ArtNet protocol.
No con guration is required, because it has been preset to
be automatically integrated in Ethernet networks and  nd
the ArtNet node. However, a web server application is also
available if it is necessary to edit the IP address.
Thanks to the universe selector, many LM 3E units can
be placed into a same network to transport many DMX
universes at the same time. In other words, a same Ethernet
network allows several DMX networks.
This is a relevant solution for consoles with more than one
DMX universe, or if there are many DMX controllers.
- DMX emitter using ArtNet protocol.
- Sends DMX into an existing Ethernet network.
- Universe selector to use several LM 3E units in a
same network.
- Possibility to edit the IP address.
- Suitable with LM 3R and LM 3R2 units.
- Dimensions (WxHxD): 86.3 x 42 x 67 mm.
FEATURES
onverter that sends Thanks to the universe selector, man
y
LM 3E units
c
CONNEXION EXAMPLE
Each LM 3E unit sends DMX information (one DMX universe per unit) into an Ethernet network. It automatically  nds
the Arnet node (in this example LM 3R) that receives the DMX information and sends DMX signal to moving heads.
Scan 1000 DMX
LM 3E LM 3R
SIDIUS 1200
Group 2 Group 2
DMX INTERFACES
LM 3E FRONT PANEL
It features LAN connexion, universe
and Bubnet selector and LED
light indicators for DMX signal and
Ethernet.
LM 3E REAR PANEL
DMX output (5 pin).
catalogo_iluminacion_2013.indd 26 09/09/2013 17:10:58