Technical data

22
Digital dimmers
WD 616 KMT
Digital dimmer
DUODIM
UNIDIM 1
UNIDIM 1 and DUODIM are ultra-compact DMX dimmers that respectively
feature one and two channels, with a maximum load of 10 A per channel.
They can also be used as a driver to remotely switch lighting effects like
scanner or moving head that do not have any assigned DMX channel.
Thanks to their compact size and chassis design, they can be easily
mounted on DIN rails or trusses.
Parameters like DMX address channel or dimmer maximum level are
very easy to set up. It is also easy to switch between dimmer mode and
chaser mode (called Switch mode). The intensity of each channel can be
edited using the dimmer mode. All the functions are shown on the display
for maximum convenience. They are compatible with switch devices like
footswitches, and with connexion panels when they work as drivers. They
also feature schuko connectors with protection lid for power output.
CONTROL PANEL WITH DISPLAY
LOCAL DIM CONTROL FOR
UNIDIM 1 AND DUODIM
SUPPORT RING AVAILABLE ON
BOTH MODELS
INTERNAL RAIL FOR
CLAMP FASTENER
This versatile and functional dimmer features 6 channels of 16 A built in a compact 2 rack unit
size. It is compatible with DMX 512 signals and has a three-phase supply. It matches almost
any user needs and provides effective lighting intensity control.
DIP switches are available on front panel to patch DMX start channel address. Each channel
can be controlled independently from the others, with a LED indicator for output level and for
DMX signal presence. It additionally features an efficient preheat control for all channels (up to
50% output level) to protect lighting  xtures.
- 6 channel DMX dimmer.
- Input signal: 512 DMX.
- Load capacity: 16A per channel. Total 22 kW (single-
phase) or 7.4 kW (three phase mode).
- DMX start channel address patchable by DIP switch.
- Individual slide dimmer control switches.
- 20A circuit breaker for each channel.
- LED indicators for each channel output level and
for DMX signal presence.
FEATURES
22
DIMMERS
Technical data UniDIM 1 DuoDIM
Main supply: AC 230 V, 50 Hz. AC 230 V, 50 Hz.
Max. total current: 10 A. 10 A per channel.
Number of channels: 1. 2.
Output connexion: 1 schuko connector with protection lid. 2 schuko connectors with protection lid.
DMX output: XLR3 pin. XLR3 pin.
DMX input: XLR3 pin. XLR3 pin.
Dimensions (WxHxD): 200 x 82 x 67 mm. 300 x 82 x 67 mm.
Weight: 1.1 kg. 2.72 kg.
Technical data WD 616D KMT
Main supply:
Single-phase:
Three-phase (3P/N/E):
AC 230/240 V.
AC 380 V.
Output power: single-phase 7.4 kW / three-phase 22 kW.
Output current: 16 A per channel.
Load type:
Resistive and inductive (no more than 15%
of nominal load if it is inductive).
Signal connector:
DMX In:
DMX Thru:
XLR3 pin and male XLR5 pin.
XLR3 pin and female XLR5 pin.
Main supply connector: Terminals (L+N+E).
Output channel connector: Terminals (L+N+E) x 6.
Dimensions (WxHxD): 483 x 88 x 381 mm. (2 HU rack 19“).
Weight: 8.38 kg.
catalogo_iluminacion_2013.indd 22 09/09/2013 17:10:21