Technical data

21
TOURDIM 48
48 channel modular dimmer
This modular dimmer (based on the D 66 K3 model) has been designed for almost any touring
applications and rental companies. It is composed of four dimmers D 66 K3 and features 48 chan-
nels of 16 A with independent circuit breakers. Each dimmer has its own circuit breaker for residual
current.
The rear panel of TourDIM 48 includes the channels outputs (with 16 pin multi-connector), input/
output connectors for DMX signal and 400 A powerlock connectors for supply. It is possible to
patch each channel as well as response curve. All the cables are included and already connected
to provide a powerful rack of dimmers ready to use.
The overall system is built in a shock absorber, reinforced, 20 HU rack unit with multi-punched late-
ral panels for cooling and four wheels (two of them with locking castors) for an easy transport.
- 20 HU rack composed of 4 blocks of 12 channels.
- Each block of 12 channels has its own circuit
breaker for residual current.
- 48 channels of 16 A with independent circuit
breakers (1P+N).
- Powerlock connector of 400 A for supply.
- 16 pin multi-connector for output channels
- XLR5 Pin connector (bypass) on rear panel for
inputs and outputs.
- Cooling system on the sides of the  ightcase.
- LED indicators for the output level of each channel.
- 16x2 character LCD display.
- Supported response curves: linear, quadratic,
quadratic inverse, On/Off.
- Preheat level on each channel.
- Slow start of lamps (4 seconds) to switch on
dimmer at full load.
- Power frequency auto-adjustment between
47 and 63 Hz.
- 41 A TRIACS.
- Control interface: Spanish, English, German
and French.
FEATURES
400 A POWERLOCK INPUT CONNECTORS16 PIN HARTING CONNECTORS
16 pin harting connector available for each 6 dimmer channels
RESIDUAL CURRENT DEVICE (RCD) /
4 POLE CIRCUIT BREAKERS FOR EACH DIMMER
DIMMERS
catalogo_iluminacion_2013.indd 21 09/09/2013 17:10:12