Technical data

17
WD 2012 DMX
12 channel modular dimmer
Thanks to rear connectors, WD 2012 DMX supports DMX, MIDI and
Analog signals. It is possible to control the DMX address of each
channel, as well as response curve, output limit, preheat level and
load check.
The internal memory of the dimmer allows to store up to 12 con gu-
rations, using parameters like execution speed and fade in/out time.
Thanks to the encoder and buttons, it is very easy to get access to
these functions. The Master/Slave mode con guration increases the
number of units that can be connected to the dimmer.
In terms of safety and security, WD 2012 DMX features high voltage
alarm, electronic fuse, load check and overheat detection system. It
is possible to block the dimmer to prevent any undesired handling.
Its modular structure allows a fast and convenient substitution of
channel power units, independently of each other and without
having to disassemble the unit.
- 12 output channels.
- 10 A per channel (total: 120 A mono-phase / 40 A three-phase).
- Inputs: DMX, MIDI, Analog (0-10 V).
- Dimensions (WxHxD): 483 x 178 x 436 mm.
- Weight: 31 kg.
FEATURES
THIS 12 CHANNEL MODULAR DIMMER FEATURES A 32 BIT CPU SOFTWARE.
ITS LARGE LCD DISPLAY SHOWS GRAPHICS AND OPTIONS FOR AN INTUITIVE USE.
POWER MODULES ARE
INTERCHANGEABLE
DIMMERS
Functions are edited from the LCD display of the dimmer (curve response, preheat, etc).
catalogo_iluminacion_2013.indd 17 09/09/2013 17:09:53