User manual

Document # 31-0008 LM2_Manual_1.3.doc

connector.

Last, “H” indicates that the unit is the MTS head unit. If the unit is not head this indicator

will appear as a “-“

1.3 Configuration Menu Screen

To enter the Configuration Menu Screen press and hold the Mode button.

Navigating the Menu:

“Enter” Accepts

“Cancel” Returns one menu level

“Mode” Returns to Main Screen

Arrows adjust selection or value

“Record” has no effect

When “Mode” is first pressed, the following choices appear:

• Display AFR or Lambda. The factory default setting is AFR.

• Calibrate Sensors - Free Air Calibrate ALL O2 sensors connected will be

calibrated

• RPM – Enable/Disable RPM and Configure RPM.

• Analog Inputs- Enable/Disable Analog Inputs and Configure Inputs.

• OBD-II - Configure Number of Channels (0-16), Channel Use, Get/Clear DTC

codes Display in Metric/Imperial Units, and Start Trace File.

• Playback Log

• Reverse/Normal Display

• Set Date/Time - Set the current date/time

Important Note: Entering the Configuration Menus will stop recording and

suspend MTS packet output