Technical data

6
LM 5
control interface for audio, lighting and AV
AR 5N is the device from where it is possible to control LM 5
locally. It is a wall mount controller that allows to select scenes
previously stored in LM 5 and trigger them, as well as to control
the master channel level. It is an IP device that requires the free
software WORKCAD Designer developed by WORK Pro to link
AR 5N to LM 5.
AR 5N
The Swiss knife for audio, AV and lighting control.
LM 5 goes much further and includes an internal memory to store 99 cues (with independent speed and fade time) and 24 cue lists, with up to 512 DMX channels. It is also a fully compa-
tible ArtNet node (Ethernet to DMX interface) and it can be controlled by OSC protocol to create DMX data. LM 5 is without a doubt the most intuitive tool to manage audio and lighting
control in commercial installations, bars, small clubs and events.
AV and lighting control within everyone´s reach!
In spite of the many improvements of the industry, lighting control has always been complicated for non specialized users. Conventional lighting consoles have been replaced by lighting
software but both options oer an intuitive interface that can be easily managed by end-users. This is precisely why WORK Pro engineers have designed LM 5, to put lighting control but
also audio control within everyone´s reach...
Control any installation using your
smartphone or tablet without previous
technical knowledge.
Installation that uses moving heads controlled by OSC protocol. It is possible to use this software
from an IOS or Android devices.
DMX INTERFACE