Technical data

5
LM 3R
LM 3R2
LM 3R and LM 3R2 are the easiest way to transport DMX signals through an Ethernet network, no matter if it is and already existent or a one-time network.
For this purpose the system requires emitters (LM 3E or ArtNet console) which introduce a DMX signal into the Ethernet network, and receivers (LM 3R and LM 3R2) that pull out the DMX
signal from the Ethernet network. The system is quick and easy to install, because it doesn’t requires any kind of conguration. It is set just by connecting and emitter and a receiver that
will recognize themselves into the network. If needed, all the devices of the series add webserver for the conguration of parametres such as IP address (except LM 3R 2). In addition,
they have an AC 100-240V/5V 500 mA external power supply. Besides, they add a MicroUSB input in order to supply it with a standard cable.
Both models are receivers / converters ArtNet-DMX and ArtNet nodes, thus, are able to interpret information from a DMX frame sent by the network and turn it into DMX information to
control devices such as spotlights, moving heads, etc.
Their conguration is simple, just selecting with the rotary wheel the same number that is selected in the transmitter (LM 3E) to establish both communication and send out / receive the
same DMX universe. The connection possibilities are huge, whether in a facility that needs to send a single universe from one location to another, send multiple universes, or even send
a single universe to two dierent areas, using one transmitter and two receivers.
LM 3R2 is an ArtNet node with two DMX universes (1024 channels), fully compatible with other devices. Users can receive the two universes either by two emitters LM 3E or from a mul-
tiverse console via ArtNet. Conguration will set which universe is the rst, automatically, setting the following universe as the second to control.
Dimensions (WxHxD): 86.3 x 42 x 67 mm.
artnet device
LM 3 Series using a multiuniverse DMX con-
troller.
Control system composed of two dierent
DMX devices sets (Moving heads) through
an Ethernet network. LM 3E and LM 3R allow
to send DMX information through the net to
each universe separately. Both units use the
ArtNet protocol.
LM 3 Series using a DMX controller with Art-
Net protocol.
Control system composed of two dierent
DMX devices sets (Moving heads) from a
DMX console (MULTIUNIVERSE CONSOLE)
through an Ethernet network. The console
allows an ArtNet direct connection.
GROUP 2
DMX Universe 1
DMX Universe 2
GROUP 7
LM 3E
GROUP 7
GROUP 2
LM 3R
Moving Heads
LM 3R
GROUP 2
GROUP 3
Universes 2 & 3
DMX INTERFACE
MULTIUNIVERSE
CONSOLE
MULTIUNIVERSE
CONSOLE
FRONT PANEL
It features LAN connexion, universe Subnet
selector and LED light indicators for DMX
signal and Ethernet.
Moving Heads
Moving Heads
Moving Heads