Technical data

4
LM 3E
LM 3E is a DMX to Ethernet converter that sends DMX signals in an existing Ethernet network using ArtNet protocol. It has been preset to be automatically integrated into protocol ArtNet,
so no conguration is required. Nevertheless, it is fully congurable also using the integrated webserver (LM 3E and LM3R)
Thanks to its group selector, several LM 3E units can be used in a same network, transporting thus various DMX universes together. This is a great solution for consoles that use more
than one DMX universe or for many independent DMX controllers.
Dimensions ( W x H x D): 86.3 x 42 x 67 mm.
artnet device
CONNECTION EXAMPLE
Each LM 3E unit sends DMX information (one DMX universe per unit) into an Ethernet network. It automatically nds the Artnet node (in this
example LM 3R) that receives the DMX information and sends DMX signal to moving heads.
LM 3E FRONT PANEL
It features LAN connection, universe Subnet selector and LED
light indicators for DMX signal and Ethernet.
LM 3E REAR PANEL
DMX input (5 pin).
LM 3E LM3 R
Moving heads
SCAN 1000 DMX
DMX INTERFACE