Technical data

28
ESD 5K/2
EST 519/2
These 2 regulators maintain a constant output supply when voltage oscillates between 140 and 250 V. It is possible to connect a 22 A x load.
If their features and operational modes are equal, the enclosures make the diference between them. ESD 5K/2 includes handles for an easy transport and has been designed in a 19”
rack format for its integration in xed installations and an input voltage selector (60V-130 V / 140V-260 V). As many xtures performance depends on voltage, it is essential to ensure the
regulation and control on these values.
To avoid noises coming from ON/OFF switches, it also features a time delay circuit (3 or 6 sec.). It features dierent protections to ensure output signal integrity: protections against over-
voltage (255 V), overheat (95°) or overload (23A). If one of these values is exceed, the unit automatically turns o and emits an acoustic signal, indicating it on the display. In addition, a
switch allows the selection of output voltage (1% or 3%).
A large display shows the information regarding devices status, like input, output and current voltage.
voltage regulators
FEATURES
- Main supply: AC 140-250 V.
- Maximum joint load: 22A.
- Maximum output current: 23A.
- Time delay: 3 or 6 sec.
- Output voltage precision: 1% or 3%.
- Protections:
Overvoltage (255 V).
Overheat (95°).
Overload (23A).
- Dimensions (WxHxD):
ESD 5 K/2: 230x 220 x 370 mm.
ESD 519/2: 483 x 185 x 340 mm.
- Weight:
ESD 5 K/2: 16.3 kg.
EST 519/2: 17 kg.
ESD 5K/2 EST 519/2
Rear panel Rear panel
voltage regulators