Technical data

20
UNIDIM 1
DUODIM
DUODIM
Support ring avaliable on both models. Internal rail for clamp fastener.
TECHNICAL DATA
UNIDIM 1 DUODIM
Main supply 230V AC, 50Hz. 230V AC, 50Hz.
Max. total current 10A. 10A. each channel / 20A total
Nº of channels 1 2
Output connection 1 Schuko connector with lid 2 schuko connector with lid
DMX output XLR3 pin XLR3 pin
DMX input XLR3 pin XLR3 pin
Dimensions
(WxHxD)
200 x 82 x 67 mm 300 x 82 x 67 mm
Weight 1.1 kg 2.72 kg.
- 1(UNIDIM 1) or 2 (DUODIM) DMX channel dimmer/
chaser.
- 10 A channel load/channel.
- Two operating modes: Dimmer or Switch.
- DMX addressing, DIM Preset and DIM Limit.
- Manual dimmer (HTP) to indicate threshold start.
- Remotely controllable (optional).
- Memory against power supply failure.
- Link connection to other units.
- Internal rail for clamp fastening.
FEATURES
UNIDIM 1 and DUODIM are ultra compact DMX dimmers featuring one or two channels (max. load: 10A. each channel). They can be used as a chaser to remotely switch lighting eects
like scanner or moving head.
Thanks to its compact size, it can be easily placed on DIN rails or trusses. The software provides an intuitive menu for parameters edition like maximum dimmer levels or DMX address
channel. User can change from dimmer operating mode to chaser one (called Switch mode). The latter allows manual intensity adjustments for each channel. For maximum convenience,
all the functions are shown on the display.
These dimmers are also compatible with switch devices like foot-switches, but also with connection panels when they are used as a driver.
The schuko connectors (1 or 2 depending on the model) has protection lid.
1 and 2 CHANNELS DIMMERS
dimmers
UNIDIM 1