Technical data

18
MINIDIM 1
MINIDIM RGB 2
Single channel dimmer / RGB dimmer
MINIDIM 1 is a single channel dimmer perfectly adequate to one colour LED xtures. It supports DMX inputs and outputs to link other units as 0-10 V analog signals.
There are two operating modes available: starting address channel (DMX) and increasing percentage of output intensity (manual).
This compact dimmer oers a simple solution for conguration and control and is capable of handling up to 6A load. Its DMX interface allowst to link several dimmers in order to control
a complexe LED unit network. It is suitable for 12-24V power supply.
TECHNICAL DATA
MINIDIM 1
Number of channels 1 channel.
Maximum load 6A.
Control signal 0-10 V Analog/DMX 512.
Connection Terminals.
Main supply DC 12-24 V 6.5A max.
Dimensions (WxHxD) 86 x 40 x 15 mm.
Weight 150 g.
MINIDIM RGB 2 supports loads up to 6 A and its DMX interface allows linking units for an extended network. Three operating modes are available: DMX start channel (DMX), increasing
percentage of output intensity (Manual) and 8 preset programs (Program). MINIDIM RGB 2 has 8 programs with speed and brightness control.
TECHNICAL DATA
MINIDIM RGB 2
Number of channels 3+1 (full dimmer).
Maximum load 6A (2A per colour).
Control signal DMX 512.
Connection Terminals.
Main supply DC 12-24 V 6.5A max.
Dimensions (WxHxD) 66 x 84 x 30 mm.
Weight 270 g.
DMX drivers
MINIDIM RGB 2
Flexible LED strip RGB (5m.) Flexible LED strip RGB (5m.)
HomeLED
Up to 6A total 2A each color (10m. led ex 60 leds/m.)
CONNECTION EXAMPLE
DMX
CONTROL ONE
MINIDIM 1
LED LINE FLEX WHITE
CONNECTION EXAMPLE
1 channel LED strips control through MINIDIM 1 using a 1 DMX channel controller (CONTROL ONE).
Example using HomeLED to control RGB LED strips through MINIDIM RGB 2.