Technical data

16
wireless dmx systems
DMX AIR MK II
This evolution in DMX AIR devices allows to use them as transmitter or receiver according to the installation needs simply by pressing the incorporated button.
Thus, it is not necessary to have stock of emitters and receivers. A set of several DMX AIR MK II solves any desired arrangement in an installation to operate either as a sender or receiver.
From point to point applications to those where one sender to multiple receivers located in dierent areas system is required. It is suitable even for applications with several sender/
receiver groups working on individual universes.
As a device that can be used in both modes, the possibilities of use increase while the cost get reduced with an element capable to perform dual function.
The most obvious application of this device is as sender of the DMX frame from a console to a number of devices located at certain distance or where it is not possible because of logistic,
type of installation or comfort, to wire them directly to the console. Using a device congured as emitter users can send this frame to another device congured as receiver via wireless,
saving the obstacle and controlling devices. Once a unit is congured as a transmitter and the other as receiver by synchronizing both devices on the same channel using the button placed
for that purpose, will be possible to send the corresponding DMX frame.
Its compact size allows installation anywhere: trusses, wall xings, mobile platforms, etc.
wireless dmx transmitter / receiver
- Wireless DMX system where each unit is a transmitter or a receiver,
depending on its conguration.
- Operating on the 2.4 GHz band.
- One transmitter can send a signal to several receivers.
- One network can include several DMX AIR MK II systems to
control universes (as many as needed).
- Range of emission: 70 m with obstacles, 350 m open eld.
- Main supply: cable with Neutrik® PowerCon connector (included).
- Lateral insertion for truss xation.
FEATURES
TECHNICAL DATA
DMX AIR MK II
Band 2400 - 2483 MHz.
Broadcast channels 13 channels.
Ratio RF data (sender) 250 kbps.
RF power (transmitter) 18 dBm.
RF sensitivity (receiver) -90 dBm.
Antenna SMA 50 to 5%.
Power supply 100-240 V AC, 50 Hz.
Consumption 2W.
Dimensions (WxHxD) 110 x 111 x 40 mm.
Weight 360 g.
Lateral insertion for truss xation.