Installation manual

6
CLEARWATER LM SERIES PRODUCT SPECIFICATIONS
Salt Level: 4000 ppm
Maximum chlorine output/hour
(gas chlorine equivalent)
LM2-24:
24 grams/hour
LM2-40: 40 grams/hour
DuoClear: 15 grams/hour
Minimum Flow rate: 12 gallons/minute
Plumbing: 1 1/2" or 2" Schedule 40 PVC
Maximum water temperature
through the cell:
104 F
Maximum operating pressure: 29 psi
Maximum salt level: 13,000 ppm
Power requirements: 220 volt
2 amp draw
Dimensions
Cell:
8 1/4" x 3" x 3 1/4"
Power pack: 7 5/8" x 14 3/4" x 4 7/8"
Limited warranty
Cell:
3 years
Power pack: 3 years
Clearwater LM Series chlorinators should be
installed on residential pools only.
Salt level in your Clearwater pool should never exceed 13,000 ppm