User Manual
b. Ranging in cloudy conditions can improve ranging performance; bright sunshine
can decrease ranging performance.
c. Ranging over a reflective body of water can cause inaccurate readings.
d. Flat and perpendicular surfaces reflect better than curved or angled surfaces.
3. Can’t get a reading (horizontal hash marks instead of distance)?
a. Press and hold the FIRE button while holding the reticle on the target. Ensure that the
FIRE button is not released before a distance is displayed.
b. Use the SCAN feature and technique. With the laser on, view through the eyepiece
and align the aiming reticle onto the flag or object and press and hold the FIRE button
and move the laser slowly over the object until distance is displayed.
c. Avoid shaking. This Class 1 laser is emitting pulses of light at 186,000 miles per
second and then receiving those pulses back. Hold the laser as steady as you would
a camera.
NOTE:
The Q6 is designed to reach highly reflective targets out beyond 2000 yards. If a reading is not
displayed, target may not be within the distance threshold, or the size, color, and reflectivity
needed to provide an accurate reading.
CLEANING YOUR RANGEFINDER:
1. Remove as much dust and dirt as possible from the lenses with ablower or bristled
lens brush.
warranties. Bottom line, our warranty* is about you, not us. Should anyCobalt laser