User Manual
SLOPE MODE (Q-6 Slope only):
The Cobalt Q6 slope on/off lever conveniently lets you flip the slope function on and off so
you get compensated distances throughout the course whenever you want, and easily turn
it off when you need a USGA conforming rangefinder legal for tournament play.
To Change:
1. Ensure the Slope Lever is in the ON position (red LED will be illuminated).
2. Press the Power button and begin ranging to an object. The degree of angle and
corrected distance will be displayed. The top digits indicate the corrected distance. The
bottom digits indicate the angle of the ranged distance in 0.1 degree increments. The
arrow to the left of the angle (G.) reading indicates whether the shot is uphill (up arrow)
or downhill (down arrow).
ANGLE RANGE (Q-6 Slope only):
Our digital accelerometer angle range is -30° to +30°. If by chance you have angles more
extreme than this, “Hi” or “Lo” will be displayed along with the corresponding Up or Down
arrow.
UNIT OF MEASURE:
The Q6 Series provides distance measurements in yards or meters.
To change unit of measure:
With the rangefinder on, press the Yards/Meters button and hold for 2 seconds until the
indicator changes.
1. Remove as much dust and dirt as possible from the lenses with ablower or bristled
warranties. Bottom line, our warranty* is about you, not us. Should anyCobalt laser