GOLF COBALT Q6 SERIES
Thank you for purchasing a Cobalt™ Q6 Series Laser Rangefinder. With this purchase you have told the world that quality, performance, and personality mean more to you than big-brand marketing. The following are instructions for getting your rangefinder ready for your next game of golf. A B E C D G I H F J PARTS OF THE RANGEFINDER \\ A. POWER / FIRE Button B. Twist-up Eyecup C. Ocular Lens D. Diopter Focus E. Laser Emission Aperture F. Laser Receiving Aperture G. Illumination Dial H.
GETTING STARTED: Your Q6 rangefinder comes with a battery already installed. Before using: 1. Open the battery cap by lifting the battery door tab and twisting the door counterclockwise. 2. Remove and discard the plastic insert sitting on top of the battery. 3. The CR2 battery is already in place. 4. Reinstall battery cap and thread on by twisting clockwise.
Q6 SERIES DISPLAY \\ A C B B H D I G F A. Aiming Reticle B. Firing Indicators C. PinSense™ Brackets D. Distance Display (Line of Sight or Corrected) E. Degree of Slope F. Slope Indicator G. Uphill/Downhill Indicators H. Unit of Measure Indicator I. Battery Life Indicator E DISTANCE TO FLAG 600 yds* ACCURACY UP TO 0.
FOCUS: Adjust the diopter focus until the image is sharp. POWERING UP: Once the battery is installed and the 4 steps are completed, press and release the POWER button. The display will light up to show the unit is on and ready for ranging. The laser will power down automatically after 10 seconds of non-use. AIMING RETICLE: This is shown as point A. in the diagram of the Q6 display. Align this over the object you would like distance to and then press the FIRE button.
PINSENSE™ AND SURGE™: Our PinSense technology is automatic and always on to sense the pin and eliminate false positives. PinSense and Surge provide visible, physical, and audible feedback so you can be confident that you’ve hit the pin! There are times on the course when trees are located behind the flag. The laser can sense multiple objects, such as trees in the background and the flag in the foreground and display only distance to the closer object.
SLOPE MODE (Q-6 Slope only): The Cobalt Q6 slope on/off lever conveniently lets you flip the slope function on and off so you get compensated distances throughout the course whenever you want, and easily turn it off when you need a USGA conforming rangefinder legal for tournament play. To Change: 1. Ensure the Slope Lever is in the ON position (red LED will be illuminated). 2. Press the Power button and begin ranging to an object. The degree of angle and corrected distance will be displayed.
BATTERY LIFE INDICATOR: Within the display, the Battery Life Indicator shows how much battery charge is remaining. The Battery Indicator will display when unit is on. If Battery Indicator blinks the battery needs to be replaced and the unit will not be operable. REPLACING BATTERY: To replace the battery, remove the battery cap by lifting the battery tab. Twist counterclockwise to open the battery compartment and insert CR2 battery with positive end facing outwards.
b. Ranging in cloudy conditions can improve ranging performance; bright sunshine can decrease ranging performance. c. Ranging over a reflective body of water can cause inaccurate readings. d. Flat and perpendicular surfaces reflect better than curved or angled surfaces. 3. Can’t get a reading (horizontal hash marks instead of distance)? a. Press and hold the FIRE button while holding the reticle on the target. Ensure that the FIRE button is not released before a distance is displayed. b.
2. Apply a few drops of lens cleaning solution to a lens tissue or microfiber cleaning cloth. Ensure that the cleaning cloth is free from dirt and grit so as not to scratch the enses. NEVER use a t-shirt, facial tissue or heavy cotton cloth on your lenses as they can scratch the lenses. 3. Using a circular motion, gently remove oil, fingerprints, and grime from the lens surface, working from the center outward. 4.
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna.
points for recycling provided by the communities. For you, this is free of charge. Further information about the subject is available at your community administration, your local waste collection company, or in the store where you purchased this equipment. SAFETY AND PRECAUTIONS Do not stare into beam or view directly without laser eye protection. Staring continuously into beam for prolonged periods of time could cause harm to your eyes.
UNCONDITIONAL LIFETIME WARRANTY We understand that you absolutely love golf and will likely put our products through some extreme situations. We have designed, engineered, and manufactured a premium quality product and our confident in its’ performance, we don’t ever want to let you down. We also know that stuff happens. We also know that many electronic products have wimpy warranties. Bottom line, our warranty* is about you, not us.
C O B A L T - G O L F . C O M 800-295-0955 \\ 160 South 4th St. Lander, WY 82520 \\ V.
