Technical data

26
Quick to install
The Wave is quick and easy to install:
•
Only requires a 2-core wire connection between the
control and the boiler
•
All other connections are via the Wi-Fi network
•
The Wave does not need an external wired sensor
unlike standard weather compensation controls
•
The Wave uses online data which signifi cantly reduces
installation time and cost to the end user.
Simple to use, providing an easy handover
The Wave’s intuitive and modern design ensures it is very
simple to operate using either its in-built touchscreen or the
app from wherever you are. Each unit is supplied complete
with written instructions for an easy handover. In addition,
short instructional videos can be viewed via the app.
When updates to the Wave software are released the
controller and app will be updated automatically and
completely free of charge.
If you lose your internet connection, the Wave will continue
to operate as an intelligent heating and hot water controller,
using the last saved programme settings.
*The Wave is a +4% control when the weather compensation mode is activated. The Wave is a +3% control in the factory default setting.
†Correct at time of printing. For the latest list of compatible boilers see the Worcester website.
Apple® devices running iOS 5.1 and higher
Android™ devices running 2.2, 2.3 or 4.0 and higher
Wave compatible devices†:
External access
(away from home)
External access
(away from home)
Phone
Wi-Fi signal
EMS 2 Wire
Internet
Router
Wave
Greenstar boiler
Wi-Fi
(in home)
Features and benefi ts
•
Only a low voltage 2-core wire connection between
the controller and the boiler
•
Easy to install, all other connections are via the
Wi-Fi network
•
Remote control of heating AND hot water via app
•
Programme the heating system from outside the home
•
Load and weather compensation via the internet
(no outdoor sensor required)
•
Allows the boiler to modulate its performance to meet the
needs of each household
•
Intuitive and modern design
•
Ensures easy programming and control of the boiler,
resulting in a simple hand over with the end-user
•
Energy graphs, presence detection and many more
features come as standard
•
Ensures increased comfort and energy savings
•
No subscription fees or chargeable app add-ons
•
One-off cost.
EFFICIENCY
+4%
*