Installation manual

INSTALLATION
8 716 115 519a (2009/03)24
5.9 FITTING THE HORIZONTAL FLUE
1. Slide the seal from the inspection plate
assembly over the flue pipe.
Fig. 36 Slide the seal over flue pipe
2. Fit the tee piece to the flue pipe.
Secure with two screws in the same manner as
described on page 23.
3. Fit the flue pipe to the elbow in the chimney.
Fig. 37 Connecting tee piece and flue pipe to elbow
4. Connect the tee piece to the appliance flue outlet.
Secure the tee piece to the connector with the two
screws provided.
Fig. 38 Connecting tee piece to appliance flue outlet
To ease the assembly of the flue
components:
B Grease all seals lightly with solvent-free
grease .
B Ensure all seals are seated properly and
are in good condition.