Installation manual

INSTALLATION

8 716 115 519a (2009/03)

5.7 FITTING THE FLUE ADAPTOR

1. Fit the flue connector to the appliance.

2. Ensure the connector‘s flat section is at the rear edge

of the inner casing.

Fig. 30 Fitting the flue connector to the appliance

3. Secure the connector from inside the inner casing

using three hexagonal bolts.

4. Insert the adaptor through the flue outlet hole on

top of the appliance.

5. Push the adaptor into the appliance flue outlet tube

until the retaining clips secure the adaptor.

Fig. 31 Making the flue connection inside the appliance

To ease the assembly of the flue

components:

B Grease all seals lightly with solvent-free

grease .

B Ensure all seals are seated properly and

are in good condition.