Installation manual

INSTALLATION
8 716 115 519a (2009/03)20
5.6 CONVERTING THE FLUE OUTLET
The appliance is supplied ready to have a flue fitted to
the rear flue outlet.
To convert the flue from the rear to the top of the
appliance, follow the procedure below:
1. Remove the “knock-out” panel from the top
outer casing.
2. Remove the screws, blanking plate and gasket from
the top flue outlet.
Fig. 28 Preparing the appliance
3. Use the screws to refit gasket and blanking plate
over the rear flue outlet.
Fig. 29 Closing the rear flue outlet
Refer to the appliance installation manual for
information on how to disassemble the
casing.