Installation manual

INSTALLATION
8 716 115 519a (2009/03)
17
3. Fit the support collar onto the flexible liner.
Ensure the retaining ring at the top of the collar is
seated in a ring of the corrugated section as shown
opposite.
4. Assemble the support bracket onto the support
collar.
Fig. 21 Fitting support collar and support bracket
The flexible flue must be centrally aligned within in the
chimney.
5. Mark the support bracket fixing points.
Drill the fixing points.
Secure the support bracket to the chimney.
Fig. 22 Fixing support collar to chimney top
In order to install the terminal adaptor, there
must be at least three corrugated sections of
the flexible liner left above the support
bracket assembly.