Installation manual

INSTALLATION

8 716 115 519a (2009/03)

5.3 ASSEMBLING THE FLEXIBLE FLUE

B Use a hack saw.

B Cut the flexible liner off square directly below a set of

ridges.

B Do not cut between the individual ridges of a set.

Fig. 11 Where to cut the flexible liner

1. Remove the liner and seal from the adaptor.

2. Remove the seal (b) from the liner (a).

Fig. 12 Removing liner and seal from adaptor

3. Use a screwdriver to release the locking tab.

4. Rotate the moveable band anti-clockwise to open

the bayonet release.

Fig. 13 Opening the bayonet release