Technical data

7
DT10RF digistat
A 24-hour programmable room thermostat (which means your time
settings remain the same for every day), with the ability to set different
temperatures for up to 6 different time periods. No separate room
thermostat is required and all the major benefits of no wiring apply. This
also helps you to comply with Buildings Regulations Best Practice, as
programmable room thermostats can make even further savings over more
traditional room thermostats and timers.
DT10RF optimiser
A sophisticated energy-saving device which automatically maintains a range
of temperatures to avoid the wasteful hot-cold-hot-cold cycle. Also features
an energy-saving optimum start, that calculates when it needs to fire the
boiler to precisely achieve the required temperature at the required time
each day. You can set different temperatures for up to 6 different time
periods for each day of the week individually. As an RF (radio frequency)
device it has the additional benefits of no wiring required. Nor is a separate
thermostat necessary.
Twin channel 7 day digital programmer
(for Greenstar oil-fired boilers)
The optional plug-in programmer for the Greenstar Danesmoor 18/25,
Greenstar Heatslave and Greenstar Camray kitchen ranges enables two
heating and hot water on/off periods to be set each day of the week. The
programmer also incorporates a ‘holiday’ setting. The digital unit fits simply
into the fascia panel and the wiring for the timer is easily plugged into a
pre-prepared socket.
Intelligent system package (30CDi Classic System only)
The ultimate but easy-to-use control solution, this optional intelligent
system upgrade is a combination of the TD200 text display 7-day
programmer and RT10 room thermostat with a built-in diverter valve.
7