Technical data

SERVICING AND SPARES
6 720 648 547 (2012/06)34
COMPONENT ACCESS
Removing outer case
1. Remove bottom panel by pulling it forward and off.
2. Undo but do not remove the 2 screws (A) securing boiler casing at the
bottom of the appliance.
3. Pull upwards to release the clip (B) on top of the boiler.
4. Pull case forward and remove.
Fig. 50 Removing outer case
Adjusting boiler control to service position.
1. Pull down the catch securing the control panel.
2. Gently pull forward until it comes to rest in service position.
Fig. 51 Service position
A
B
4.
6720647361-27.4Wo
2.
3.
1.
6720648547-45.1Wo
2.
1.