Operating instructions

ROUTINE MAINTENANCE
It is essential that your boiler is installed and serviced by a
competent heating engineer, and Worcester will be pleased to
arrange regular servicing and a comprehensive maintenance con-
tract.
Alternatively, the Oil Firing Technical Association for the
petroleum industry (OFTEC) will gladly advise you of engineers
trained by and registered with OFTEC.
Servicing should be carried out at least once a year for boilers
which burn 28-second kerosene, and twice a year for boilers
which burn 35-second gas oil.
SERIAL NUMBER
Your boiler serial number and model number should always
be quoted in any contact with Worcester. This will help identify
spare parts and also avoid confusion and delays during any service
call-out. You will find these numbers on the serial number label
which is located on the front of the control facia on all models.
For access see section “Accessing your boiler controls.”
TECHNICAL INFORMATION
The Danesmoor range of oil-fired boilers can provide both
domestic hot water and full central heating, with outputs ranging
from 12kW to 70kW (40,000 to 239,000 Btu/h). Domestic hot
water must be supplied via a conventional indirect hot-water sys-
tem, utilising an indirect double-feed cylinder.
The appliance is supplied without a circulating pump, but
there is provision to locate a pump within the boiler casing. For
further details please consult your installer.
4