Instruction manual

REFITTING COMPONENTS

2 Lift electrical control box (A) back onto the

supporting bracket (B).

 Locate the control box bracket at the rear a

and secure at the base of the primary heat

exchanger with the securing nut (C).

 Carefully feed the capilleries (D) back over

the front of the boiler and through the

plastic tie (E) and locate in the correct

pockets.

 Slide the drip tray (F) back into position.

REFITTING

COMPONENTS

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR DANESMOOR WALL MOUNTED OIL 12/18-18/25

8 718 681 134a (08.08)

INSTALLATION