Instruction manual

Combustion chamber:
3 Check all the baffles (A), baffle retainers
(B) and restrictor plates (C) are correctly
fitted, (they may have moved during
transport or installation), then refit the
baffle access door (D).
 Refit the combustion chamber door (E)
using the nuts and washers (F), tighten
until the door is firmly secured using the
sequence opposite to a torque of 6 Nm.
Do not overtighten the nuts.
COMBUSTION CHAMBER
Plan sectional view
Plan sectional view
Combustion chamber
access door tightening
sequence.
IMPORTANT when refitting
the combustion chamber
access door
12/18
18/25
3
Secondary
heat exchanger
baffles and
retainer
B
E
D
D
F
B
A
C
COMBUSTION
CHAMBER
INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR DANESMOOR WALL MOUNTED OIL 12/18-18/25
8 718 681 134a (08.08)
25
INSTALLATION
Primary
heat exchanger
baffles and
restrictor
plates
B
A
C
F
F
F