Instruction manual

All removed parts must be placed safely away

from the working area until required in order

to avoid a potential tripping or slipping

hazard.

At all times the correct method for handling

heavy objects should be strictly observed.

Removing the base support board:

It is advised that two or more persons are involved in

the handling of the appliance during the following

proceedure.

1 Carefully pull the front panel away from the

bottom of the wall mounting frame and lift

clear of the two upright tabs (A) at the top of

the frame. Remove from the appliance and

store safely away from the working area until

required.

2 Remove the drip tray (B) by sliding forwards

and away from the appliance.

Undo the hos clip connection (C) at the

top of the flue outlet assembly and the one at

the burner securing the flexible air supply

hose and remove.

3 Undo the connections (D) on the flow and

return pipes (nuts one end and spring clips

(E) the other) and remove the pipes. Store

safely away from the boiler.

Undo the nut (F) securing the burner and

remove the burner (G) from the appliance.

Make sure the burner lead is unpluged

from the boiler conrol box.

UNPACKING THE BOILER

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR DANESMOOR WALL MOUNTED OIL 12/18-18/25

8 718 681 134a (08.08)

INSTALLATION