Technical data

16
Fig.16. Water Plate Positions. (Panel viewed from inside)
Top of Open Side Panel
For 12-25 (50-90)
models use the bottom
holes to fasten
N.B. The plates
should be
fastened on the
inside of the open
side panel.
Water plate (A)
Electrical cable entry
N.B. Ensure the
open/close bush is in
position.
For all models use the
top holes to fasten
Water plate (B)
For 26/32 (90/110)
models use the top
holes to fasten
N.B. In this installation the water plates are positioned using the 22mm option with
the pipes exiting in line with the boiler sockets and the pipe work is shown exiting
from the left hand side.