Technical data

6
DRY WEIGHT OF APPLIANCE 96kg
PACKAGED WEIGHT OF APPLIANCE 98kg
MAXIMUM INSTALLED WEIGHT 156kg
Table 5: Nominal Weight of Appliance
SPECIFICATIONS
CENTRAL HEATING FLOW 22 mm Copper Tube
CENTRAL HEATING RETURN 22 mm Copper Tube
COLD WATER MAINS INLET 15 mm Copper Tube
DOMESTIC HOT WATER OUTLET 15 mm Copper Tube
GAS INLET 22 mm Copper Tube
PRESSURE RELIEF VALVE DRAIN CONNECTION 15 mm Copper Tube
OVERALL CASING HEIGHT 860 mm
OVERALL CASING WIDTH 600 mm
OVERALL CASING DEPTH 600 mm
Table 6:
SPECIFICATIONS
PRIMARY CAPACITY INCLUDING HEATBANK 60 Litres
MAXIMUM INLET DOMESTIC WATER PRESSURE 10 Bar
MINIMUM INLET DOMESTIC WATER PRESSURE (WORKING) 2.2 Bar
FOR MAXIMUM HOT WATER FLOW 1.3 Bar with flow regulator removed
MINIMUM INLET DOMESTIC WATER PRESSURE (WORKING) 0.1 Bar
TO OPERATE THE APPLIANCE
MAXIMUM CENTRAL HEATING FLOW TEMPERATURE Nominally 82°C
MAXIMUM STATIC HEAD – PRIMARY 30m
MINIMUM STATIC HEAD – PRIMARY 1.0m
OUTPUT TO CENTRAL HEATING & DOMESTIC HOT WATER 8.8 (DHW), 11.0 (CH) to 24.0kW (Modulating)
MAXIMUM DOMESTIC HOT WATER FLOW RATE FROM THE APPLIANCE Nominally 18.0 l/min. ± 15%
EQUIVALENT HOT WATER FLOW RATE FROM THIS APPLIANCE TO GIVE 20 l/min.
30°C RISE (SPECIFIC RATE D)
FLUE PRODUCTS 12.9 gm/sec
FLUE PRODUCTS TEMPERATURE 160°C
NOx CLASSIFICATION Class 3
SEDBUK NG 78.8 % BAND D
LPG 80.7 % BAND D
Table 7
PUMP HEAD
BOILER OUTPUT HEAD MIN. FLOW RATE
FLOW/ RETURN
DIFFERENTIAL
kW Metres L/min. °C
11.0 6.1 11.5 11°C
24.0 5.0 16.5 21°C
Table 4
Minimum Clearances Installation Service
Above the appliance 450 mm 10 mm
In front 600 mm 600 mm
Right side 5 mm 5 mm
Left side 300 mm 5 mm
Table 8