Specifications

ٻۃۏۏۋڕڊڊےےےډےۊۊێۄۈډھۊۈٻ

ڎڒ

[Notes] 1) The command is enabled only when processed at the beginning of the line in

standard mode.

2) If this command is input in page mode, the printer performs only internal flag

operations.

3) This command has no effect in page mode.

4) This command executes justification in the printing area.

5) This command justifies the space area according to HT, ESC $ or ESC \

[Default] n = 0

[Example]

[Name] Horizontal Tab

[Format] ASCII HT

HEX 09

Decimal 9

[Description] Moves the print position to the next horizontal tab position.

[Note] 1) This command is ignored unless the next horizontal tab position has been set.

2) If the next horizontal tab position exceeds the printing area, the printer sets the

printing position to [Printing area width + 1]

3) Horizontal tab positions are set with ESC D.

4) If this command is received when the printing position is at [Printing area width

+ 1], the printer executes print buffer-full printing of the current line and horizontal

ٻٻtab processing from the beginning of the next line.

5) The default setting of the horizontal tab position for the paper roll is every 0

character.

[Reference] ESC D