Specifications

ٻۃۏۏۋڕڊڊےےےډےۊۊێۄۈډھۊۈٻ

ڎڌ

[Note] 1) Only the lowest significant bit of n is valid.

2) This command is enabled only when processed at the beginning of a line in

standard mode.

3) When this command is input in page mode, the printer performs only internal flag

operations.

4) This command does not affect printing in page mode.

5) In upside-down printing mode, the printer rotates the line to be

printed by 180 degree and then prints it.

[Default] n = 0

[Example]

GS ! n

[Name] Select character size

[Format] ASCII GS ! n

HEX 1D 21 n

Decimal 29 33 n

[Range] 0

അ n അ 255

[Description] (1 അ vertical number of times അ 8, 1 അ horizontal number of times അ 8)

Selects the character width using bits 0 to 2 and selects the character height using

bits 4 to 7, as follows;