User's Manual

http://www.woosim.com
15
X Press FEED Button one time, Power Lamp twinkles 3 times and Error Lamp
twinkles 2 times.
o
Press MODE Button one time, Error Lamp twinkles one time.
(The Data Bit has set to 7 data bit)
X Press FEED Button one time, Power Lamp twinkles 4 times and Error Lamp
twinkles 1 time.
o
Press MODE Button one time, Error Lamp twinkles 2 times.
(The Parity bit has set to even parity bit)
X Press FEED Button one time, Power Lamp twinkles 5 times and
Error Lamp twinkles 1 time.
o
Press MODE Button one time, Error Lamp twinkles 2 times after then
press MODE Button again, the Error Lamp will twinkle 3 times.
( The density has set to High)
If all the mode have set, press the MODE Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(PROTOCOL IrDA/ 38,400 BAUD/ 7 DATA BIT/ EVEN PARITY/ DENSITY HIGH)
If the status is not correct, please try it again according to the procedure.