User's Manual

PC & Dock Controls Lexicon
5-4
DOCK FUNCTIONALITY
The D-1 Dock optional accessory allows you to enter a new world of
listening enjoyment made possible by combining the increased
storage capacity and playback flexibility of an iPod® (not included)
with the sonic power of your Lexicon receiver. Operation is easy,
you can use your Lexicon remote control or the front panel Tuner
section of the MV-5 to access and control your iPod selections. Just
one simple connection and you’re ready to go!
Note: This functionality is ONLY available if you have purchased the D-1
Dock optional accessory.
CONNECTING THE DOCK TO THE MV-5
Before connecting the Dock, turn your receiver off using either the
main power switch or the Standby button.
With the receiver off, press the button on each side of the
connector at the end of the Dock cable and insert this plug into the
DOCK connector on the receiver’s rear panel. The connector is
keyed to only connect in one way. If you inadvertently try to plug
the connector in the wrong way, do not force it. Simply invert the
connector and try again.
When the DOCK connector is attached to the D-1 Dock accessory
and the current input is DOCK, the MV-5 2-line display indicates
that the input is “Unplugged...”. The status will remain as
“Unplugged” until an iPod is actually docked.
Note: The DOCK Input setup displays Digital Audio as NONE, Analog Audio
as DOCK (or “Unplugged” if there is no iPod connected to the MV-5), and
the Dig/Anlg Auto parameter is dashed out. These three parameters cannot
be changed for the DOCK Input.
When the iPod is initially plugged into the MV-5, the iPod goes to
the top of its music menu. When the iPod is removed, the iPod
menu goes to the root menu.
If the MV-5 is in Standby mode and the iPod is currently playing a
track when it is plugged into the Dock, the track will continue to
play and the 2-line display will show the current track information.
SELECTING THE CORRECT iPOD INSERT
Each iPod model is a slightly different size, making it necessary to
use an insert that matches your specific iPod to the D-1 Dock. The
Dock is shipped with the insert for the color screen and photo
models already installed; if you own one of those models, no further
changes are necessary.
If you own a different iPod, first select the insert that matches your
model. The model identification is printed on the back of each of
the four extra inserts supplied with the Dock.
Note: The iPod Shuffle is not supported by the D-1 Dock option.
Press buttons when inserting or removing the plug.