User's Manual

MV-5 Audio & Video Controls
4-5
VIDEO STATUS
The VIDEO STATUS menu is an information-only menu identifying
the current video status of the MV-5.
• INPUT RESOL identifies the current input resolution setting.
• COPY PROTECTION identifies the current status of the copy
protection mode.
• V-PROCESS identifies the current setting of the video processor.
• OUTPUT RESOL identifies the current output resolution setting
of the HDMI and Component outputs.
Note: The HDMI and component output resolution values are always
the same.
• COMPONENT OUT identifies the currently selected
component output status as described below.
• S-VIDEO OUT identifies the currently selected S-video output
status as described below.
• COMPOSITE OUT identifies the currently selected composite
output status as described below.
The Component, S-Video, and Composite Out parameters all reflect
the interaction between the input type (which is not listed in the
Video Status menu), the copy protection status, the video process
parameter setting, and the current output resolution.
Therefore...
• Component Out will display “OFF” if the component output is
disabled for the current video input and processing
configuration. Otherwise, it will display “Enabled”.
• S-Video Out will display “OFF’ if the S-video output is disabled
for the current video input and processing configuration.
Otherwise, it will display the current output resolution.
• Composite Out will display “OFF’ if the composite output is
disabled for the current video input and processing
configuration. Otherwise, it will display the current output
resolution.
VIDEO CONTROLS
INPUT RESOL: - - -
V-PROCESS: FAROUDJA
OUTPUT RESOL: - - -
COMPONENT OUT: 480i
S-VIDEO OUT: OFF
COMPOSITE OUT: OFF
VIDEO STATUS
COPY PROTECTION: OFF