User's Manual

Audio & Video Controls Lexicon
4-2
AUDIO CONTROLS
Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the autocalibration settings, except for
the Audio Status parameter.
AUTO EQ OFF, ON
If the AUTOCAL process is performed and the settings are saved,
then the Auto EQ parameter identifies if the saved AUTOCAL
settings are being actively applied to the system. When the Auto EQ
parameter is OFF, the AUTOCAL settings are not applied. The EQ
Adjust parameter is also not applied.
EQ PRESET PRESET 1, PRESET 2, PRESET 3, USER
Identifies the three preset locations where the AUTOCAL settings
are saved, and displays the state of each preset (saved or unused).
The Active PS, or Active Preset, identifies the preset location that is
currently active if the AUTO EQ parameter is set to ON for any
input. The Active Preset can be set to any of the three saved preset
locations. The preset location listed under the Active Preset
parameter indicates which of the saved autocal settings are
currently in use.
To load a different saved preset into the system:
1. Decide which saved Preset location you want to load.
2. Select ACTIVE PS from the EQ PRESET menu.
3. Use the  or  cursors to select the Preset location you want
to load.
4. Press the cursor to save the selection.
AUDIO CONTROLS
EQ PRESET
TONE CONTROLS: OFF
BASS: 0dB
TREBLE: 0dB
AUDIO STATUS
EQ PRESET
PRESET 1: FACTORY
ACTIVE PS: USER
PRESET 2: FACTORY
PRESET 3: FACTORY
AUDIO STATUS
INPUT: HD
MODE FAMILY: LOGIC 7
AUDIO: - - -
NAME:
MODE: MUSIC 5.1
CONNECTOR: ANALOG 3
MAIN MENU
AUDIO CONTROLS
VIDEO CONTROLS
SETUP
EQ ADJUST
HF SHELF: 0dB
AUTO EQ: ON
EQ ADJUST
AUDIO CONTROLS
AUTO EQ: ON
AUDIO CONTROLS
EQ PRESET