User's Manual

Setup Lexicon
3-22
due to video edits or overlay of video text over film is compensated
for by processing, before artifacts such as feathering may appear.
FLESHTONE NR OFF, ON
Selects the Fleshtone Noise Reduction parameter, which preserves
the detail in faces and flesh tones while reducing noise in the total
picture.
COMPONENT ENHANCE OFF, ON
Selects the Component Video Enhance parameter, which processes
incoming component video signal to adjust the high-frequency
content of the signal resulting in enhanced depth in the picture as
well as greater small object detail.
BRIGHTNESS 50 TO 150
Changes the video level to a darker or brighter setting. The
BRIGHTNESS adjustment range is 50 to 150 in single increments.
CONTRAST 50 TO 150
Changes the black level of the video to compensate for poor
contrast. The CONTRAST adjustment range is 50 to 150 in single
increments.
COLOR 50 TO 150
Changes the color of the video to compensate for over- or under-
color saturation conditions. The Color adjustment range is 50 to 150
in single increments.
TEST PATTERN
Selects the Test Patterns parameter, which provides a series of
standard test signals that are used during the factory testing of the
MV-5. While these test patterns can be viewed, they are not
designed for user adjustment and will not show any visible signs of
adjustment to the video display or to the MV-5 settings. The test
patterns are:
• Color Bars – these are a variation of the traditional split-field
color bars used to check the internal settings for luminance/
chrominance voltage levels with respect to the eight basic
colors.
• Triangle Fixed – this test pattern puts two opposing triangles on
the screen, with a black triangle on the right and a white
triangle on the left, to test aspects of the pull-down logic
software.
• Triangle Flashing – this test pattern also puts two opposing
black and white triangles on the screen, but it flashes them at a
high frame rate, to test the 3/2 pull-down edit detection and
other aspects of the processor and interpolation software.
• Ramp/Square – this complex pattern uses a variety of fixed and
pulsating gray-scale images to test different aspects of the 3/2
pull-down edit detection and other aspects of the processor
and interpolation software.
Note: If a test pattern is selected, the menu cannot be viewed on the
display until the test pattern is turned off. Exiting the menu structure will
INPUT SETUPSETUP
ADVANCED VIDEO
FLESHTONE NR
INPUT SETUPSETUP
ADVANCED VIDEO
COMPNT ENHANCE
INPUT SETUPSETUP
ADVANCED VIDEO
BRIGHTNESS
INPUT SETUP
SETUP
ADVANCED VIDEO
CONTRAST
INPUT SETUP
SETUP
ADVANCED VIDEO
COLOR
INPUT SETUPSETUP
ADVANCED VIDEO
TEST PAT