User's Manual

Setup Lexicon
3-20
ADVANCED VIDEO
Selecting the SETUP menu INPUT SETUP menu ADVANCED VIDEO option opens the ADVANCED VIDEO menu, a two-screen menu which
provides user-adjustable controls for sharpness, noise reduction, brightness, and other video fine-tuning.
Note: Most of the advanced video parameters are only available when the V-Process parameter is set to FAROUDJA.
INPUT TYPE
Identifies the type of device being used for the input source. Once
the selection is made, the advanced video settings will change to
default settings that are best suited for that type of device. Manual
changes to these settings may also be made. The input types
available for selection are:
• DVD – This setting is optimized for use with the output signal of
a typical DVD player.
• VCR – This setting is optimized for use with the output signal of
an analog videocassette recorder.
• DIG CABLE – This setting is optimized for use with digital cable
set-top boxes. Note: Even when a digital cable system is in use,
there may be a mix of digital and analog channels. Start with
this configuration and then change the advanced video options
as needed to tailor the output to your preferences.
• DIG SAT – This setting is optimized for use with digital satellite
system set-top boxes.
• ANLG CABLE – This setting is optimized for use with analog
cable set-top boxes.
• ANLG SAT – This setting is optimized for use with analog
satellite system set-top boxes.
• DIG CAM – This setting is optimized for use with digital
camcorders or still-image cameras.
• ANLG CAM – This setting is optimized for use with analog
camcorders.
Refer to the table on the following page for the default video source
settings.
SHARPNESS 0 TO 100
Adjusts the degree to which the enhancement circuits that adjust the
high-frequency content of the signal are applied. The setting acts on
the vertical and horizontal as well as luminance and chrominance
parameters to offer an enhanced depth in the picture as well as
greater small object detail. In general, the lower settings are appli-
cable for digital displays and sources, while the higher settings may
be preferred for CRT-based displays and digital sources. The
Sharpness adjustment range is 0 to 100 in single increments.
INPUT TYPE: VCR
SHARPNESS: 32
NOISE REDUCTION: ON
X-COLOR SUPPRESS: ON
DCDi INTERPOL: ON
FILM DETECTION: ON
FILM EDIT DETECT: ON
ADVANCED VIDEO 1
FLESHTONE NR: ON
COMPNT ENHANCE: ON
BRIGHTNESS: 100
CONTRAST: 100
COLOR: 100
TEST PAT: OFF
ADVANCED VIDEO 2
INPUT SETUPSETUP
INPUT SETUPSETUP
ADVANCED VIDEO
INPUT TYPE
INPUT SETUPSETUP
ADVANCED VIDEO
SHARPNESS