User's Manual

MV-5 Setup
3-15
To Customize the Name of the Selected Input:
1. Select the input and enter the Input Setup menu.
2. Select the Name parameter. Note that a blinking dot or square
appears in the first letter position.
3. Using the  and  arrows, scroll through the letter list until you
find the first desired letter.
The letter list is arranged with Uppercase letters > lowercase
letters > numbers > symbols. The letters are listed in alphabetical
order and the numbers in numerical order. All standard ASCII
characters are included.
4. Press the SELECT button or  arrow to save the first letter and
move to the next letter. A blinking dot appears in the second letter
position.
5. Repeat Steps 2 through 4 until the complete name is entered.
Note: The arrow saves the custom name. The  arrow allows you to
move forward, one space per one button press. To add a space to your
custom name, press the SELECT button or  arrow without choosing a
letter.
Use the same procedure to edit a previously saved name.
VIDEO IN
Selects the VIDEO IN parameter, which assigns one of the rear panel
video input connectors to the current input. Available selections
include NONE, HDMI 1-2, Component 1-3, S-Video 1-4, and
Composite 1-4.
The HDMI Audio & Video inputs, HDMI 1 and HDMI 2, are mutually
exclusive inputs - only one input is available at a time for each input
location. For example, while setting up the DVD input, if HDMI 2 is
selected for the Video Input, then HDMI 1 is not a selectable option
for the Digital Audio Input.
V-PROCESS FAROUDJA, CONV ONLY, BYPASS
Selects the V-PROCESS parameter, which identifies the type of video
processing or conversion, if any, which is applied to the selected
input source. Explanations of the available selections are listed below.
Faroudja - The video signals can be handled in several different ways,
depending upon the input source.
• A standard-definition (480i or 576i) analog signal
(composite, S-video, or component) will be digitized and
sent to the Faroudja video processor for enhancement.
The signal will be available as both an analog component
and an HDMI signal.
• An analog component high-definition signal will be
digitized and sent to the Faroudja video processor for
enhancement. The signal will be available as both an
analog component and an HDMI signal, but not at the
analog composite or S-video monitor outputs.
• Any HDMI signal other than 1080i will be sent to the
Faroudja video processor for enhancement and it will be
available as an output at both the HDMI and analog
component outputs. Program material that carries HDCP
(High-Bandwidth Digital Content Protection) encoding
will only be available through the HDMI output.
• HDMI signals in 1080i resolution will be sent directly to
the HDMI and analog component outputs without
processing. Program material that carries HDCP
encoding will only be available through the HDMI
output.
The Faroudja selection delivers the best image quality when a digital
video display is in use but it requires the use of a video display
capable of accepting high-resolution (480p and above) signals
through either an HDMI or component video connection.
INPUT SETUPSETUP
VIDEO IN
INPUT SETUPSETUP
V-PROCESS