User's Manual

MV-5
2-9
MV-5 MENU OVERVIEW
When the remote control touch screen is in the
“LEX”, “TUNER”, or “ZONE 2” menus, pressing
MENU or SELECT on the Remote Control
accesses the menu controls for the MV-5
Processor. The MAIN MENU is the root
directory of the MV-5 menu tree and has three
branches: AUDIO CONTROLS, VIDEO
CONTROLS, and SETUP.
Note: When the MV-5 menu structure is entered, most front panel buttons
and the remote control buttons are disabled until the menu structure is
exited. The exceptions are the Volume Knob and Standby Button on the
front panel and the remote control Volume, Mute, and OFF buttons. Note
also that the disabled condition of the remote control only affects the
“LEX”, “TUNER”, and “ZONE 2” menu layers.
MENU NAVIGATION
Use the remote control arrow buttons to navigate the MV-5 menu
structure, shown in detail in Appendix B. The Command Matrix
Table indicates the navigation commands that the remote control
buttons perform when the MV-5 command bank is activated by
selecting the “LEX”, “TUNER”, or “ZONE 2” options on the remote
control touch screen.
MAIN MENU
AUDIO CONTROLS
VIDEO CONTROLS
SETUP
Arrow Navigation Functions

When a menu is open, press the remote control
Menu  arrow to select the highlighted menu
parameter. The menu parameter will blink to
indicate that it is selected.

When a menu is open, press the Menu  arrow to
close the menu and, in most cases, open the
previous menu. Subsequent presses continue to
close the current menu and open the previous
menu until the MAIN MENU is closed.


When a menu is open, press the Menu  and 
arrow buttons to scroll upward and downward
through the complete list of menu parameters. The
highlighted menu item appears in the front panel
display. All menu items appear in the OSD. The
cursor automatically wraps to the next menu
parameter when the first or last menu item is passed.
When a menu parameter is selected and blinking,
press the Menu  and  arrow buttons to scroll
through the available parameter options.
SELECT
Press the SELECT button to open the menu structure,
open a menu branch, or select a menu parameter.