User's Manual

MONITOR OUTPUTS (MAIN ROOM VIDEO DISPLAY)

Composite/S-Video

When connecting the AVR21EN to a standard, analog video display that only has standard

composite and S-Video inputs, the component video inputs on the AVR21EN may not be used.

1. Connect the Composite and/or S-Video Monitor Outputs [circle 40] to the matching

composite and S-Video inputs on your video display, depending on which types of video are

output by your source devices.

Component Video

1. If the AVR component video inputs are used, connect the Monitor Component Video

Outputs [circle 15] to the component video inputs of your TV, projector or other display

device.

NOTE: When connecting the AVR21EN to a “digital ready”, “HDTV compatible” or high-

definition display (which is any device capable of accepting an input signal of 480P or higher),

you are able to take advantage of the unit’s advanced video processing circuitry which

converts all video signals to a 1080i output. Since the AVR21EN displays the on-screen

menus with upconverted video, the connection from the AVR21EN to the display need only

be one set of Y/Pr/Pb component video cables to the Monitor Component Video Output

[circle 15].

HDMI

1. Connect the HDMI Output [circle 18] to an HDMI input on the Main Room Video Display.

NOTE: The AVR21EN configuration for using the HDMI Output will disable the Monitor

Component Video Outputs. See VIDEO MONITOR SETTINGS for more information.