User's Manual

Coaxial Digital Audio

1. Connect the Coaxial Digital Output of a DVD/CD player to the Signal Input Jack [star 1] on

a SPF.

2. Connect the Signal Output Jack [star 2] on the SPF to the Coaxial 1 [circle 19] jack on the

AVR rear panel.

3. Connect the 3.5mm mini-plug pig-tail [star 3] to the Disc 1 SPF IN [circle 39] on the AVR

rear panel.

4. If using one SPF, connect the Power Input to an Audioacess SPF/PS Power Supply. If using

multiple SPFs, connect the Power Input [star 5] to the Power Pass-Through [star 6] on the

previous SPF using the included 2.1mm jumper wire.

DVD Changer Status – Disc 1

NOTE: This connection will provide disc, track, and track time information from SONY ES DVD

Changers. This information is displayed on KP21 Keypads in Multiroom applications.

1. Connect the RS232 port on a SONY ES DVD Changer to the Disc 1 DVD Changer Interface

Terminal [circle 34] on the AVR rear panel.

DISC 2

Same as Disc 1 above except:

1. Use Disc 2 connections for analog audio and video.

2. Use Coaxial 2 for digital audio.

3. Use Disc 2 SPF IN for optional power management.

4. Use Disc 2 DVD Changer Interface for DVD Changer 2 Status.

DISC 3 (DVD)

Same as Disc 1 above except:

1. Use Disc 3 connections for analog audio and video.

2. Use Optical 2 for digital audio.

3. Use Disc 3 SPF IN for optional power management.

4. Use Disc 3 DVD Changer Interface for DVD Changer 3 Status.

DISC 3 (iPOD)

Figure 11 iPod/aDock Connections