User's Manual

222
MULTIROOM SPECIFICATIONS
AVH21 Audio Video Hub
Dimensions: 13 3/8” W x 6 1/2” D x 3 1/2” H
Video Inputs: 6 F-type Composite Source; 7 F-type Composite
Camera
Video Outputs: 6 F-type Composite Source Bypass, 7 F-type
Composite Camera Bypass, 6 F-type Composite
Zone Out
Door Relays: 2 switchable 12/24 Volt Latching Triggers, 2 Dry
Contact Latching Triggers
Uplink: 1 IEEE 1394, RJ45 Jack
Keypad Inputs: 7 RJ45 Jacks, 1 Expansion/Aux Keypad RJ45
Jack
Power Requirement: 24VDC (from WPS21)
WPS21 Power Supply Hub
Dimensions: 13 3/8” W x 6 1/2” D x 3 1/2” H
Keypad Power Terminals: 7 24VDC plug-in
AVH21 Hub Power Terminal: 1
Power Mains: IEC 2-prong removable power cord
KP21 Keypad
Amplifier
Output power: 50 Watts per channel,
20Hz – 20kHz, 8 ohms, 0.1% THD
DSP: Texas Instruments™
Speaker connector: Screw-down terminals, accepts up to 14-gauge
wire
Power supply input: 26V DC. Four conductor power-supply inputs for
use with 14/4 wire
Dimensions
Bezel dimensions: (H x W): 4-1/2" x 4-1/2" (114mm x 114mm)
Wall cutout and mounting depth: As per Carlon box used
Approved Carlon mounting boxes: BH235A (new work, closed box),
BH234R (old work [retrofit], closed box),
SC200A (new work, open frame)
Fits in two-gang USA UL J-box
Audio Input/Output
Source audio input: 48kHz digital audio stereo input from AVR
Audio distribution method: Uncompressed digital audio via digital signal
transfer bus over Cat. 5e
Local analog stereo input: Line-level analog input on screw-down terminal
Analog stereo preout: Line-level analog output on screw-down terminal
Microphone output (paging): Built-in microphone mounted behind bezel
IR input: Built-in IR receiver behind bezel; remote IR
sensor input for use with wired IR eye, includes
12-volt power and signal input