User's Manual

219
b) Select the source to be selected when the zone is turned on with the keypad or
remote.[hexagons 6, 7, 8, 20, 21]
c) Press BACK [hexagon 12] to return to POWER ON MODE
SETTINGS. This screen provides information regarding keypad firmware/software versions.
There are no configurable settings in this screen. [hexagon 7]
RESET SETTINGS. CAUTION: Pressing this button will reset this keypad’s settings to factory
defaults. Any programming for timers or preferences will be erased. Only press this button to
clear all keypad settings.
a) Press RESET SETTINGS. [hexagon 8] (The zone will turn off for a few seconds and turn
on to the SYSTEM INITIALIZING screen. The zone will turn off when reset is complete.)
b) Press the keypad Power Button [hexagon 3].
c) Press MENU [hexagon 11] for MAIN MENU.
d) Press SETUP [hexagon 9] to configure keypad settings or select another system
function.
LED DIMMER LED Dimmer adjusts the brightness of the keypad backlighting.
a) Press LED DIMMER. [hexagon 9]
b) Press the ▼LED DIMMER▲ Buttons [hexagons 6, 21] until backlight is set to preferred
brightness.
c) Press BACK [hexagon 12] to return to LED DIMMER.
d) Press MENU [hexagon 11] to return to MAIN MENU.