User's Manual

190
Wake –Up Group
Reference only. Not configurable in this screen.
Volume Setting
This setting configures the volume that all zones in the group being configured will turn on at.
Consider the use of Wake-Up Groups when setting this level. Wake-Up for alarm clock purposes
should be loud enough to wake someone up but without shocking them or disturbing other zones.
A Wake-Up Group set for dinner-time background music should be set as exactly
that…background music.
To configure Volume Setting:
1. In the WAKE-UP SETUP 1-2 screen, press the ▼/▲ Navigation Button [oval 16] to
position the cursor next to VOLUME SETTING.
2. Using the ◄/► Navigation Button [oval 16], set the turn-on volume that the group being
configured is to turn on at: Range: -10 to -50dB.
Local Control
This setting will determine whether the individual zone’s keypads will have the ability to override
the Group settings.
To configure Local Control:
1. In the WAKE-UP SETUP 1-2 screen, press the ▼/▲ Navigation Button [oval 16] to
position the cursor next to LOCAL CONTROL.
2. Using the ◄/► Navigation Button [oval 16], set the keypads in the group being configured:
YES/NO.
To change settings in WAKE-UP 1 PAGE 1, position the cursor next to GO TO WAKE-UP 1
PAGE 1 and press the Set Button [oval 18]. Make changes as desired.
To set a second Wake-Up time for the Group currently being configured, position the cursor next
to: GO TO WAKE-UP 2. Press the Set Button [oval 18] and follow previous instructions starting
at WAKE-UP GROUP.
To exit menu and return to system mode, press the Exit Button [oval 17]. To continue Zone
Setup, position the cursor next to BACK TO SETUP BY NO. Press the Set Button [oval 18]. The
SETUP BY NUMBER PAGE 3 screen will appear. Press the ▼/▲ Navigation Button [oval 16]
to position the cursor next to SLEEP GROUP. Press the Set Button [oval 18]. Proceed to next
section.
Sleep Group
This setting assigns the zone being configured to a Sleep Group. A Sleep Group is a group of
zones that have been configured to turn off at a specific time. Each zone has the option to be a
part of a Sleep Group (1-8) or not (NONE). All zones set to the same group number will turn off
together. Each Sleep Group can have two Sleep Times. NOTE: Zones can also be configured
manually for individual Sleep functions when desired.
To assign a zone to a Sleep Group:
1. In the SETUP BY NUMBER PAGE 3 screen, press the ▼/▲ Navigation Button [oval 16] to
position the cursor next to SLEEP GROUP.
2. Using the ◄/► Navigation Button [oval 16], select the Sleep Group for the zone being
configured: NONE, 1, 2, 3, 4, 5, 6, 7, 8.
3. Using the ▼/▲ Navigation Button [oval 16] position the cursor next to SET SLEEP TIMES.
Press the Set Button [oval 18]. The SLEEP SETUP 1-1 screen will appear. (Figure 116)