User's Manual

179
4. Repeat steps 2-3 above until the Sleep Group Name has been spelled out. A Group Name
can have up to 12 letters. Press the Set Button [oval 18]. This will store the name and return
the cursor to the arrow next to NAME.
5. To name additional groups, press the ▼/▲ Navigation Button [oval 16] to position the
cursor next to GROUP. Press the ◄/► Navigation Button [oval 16] to select another group.
6. Repeat steps 2-4 until all desired Wake-up Groups have been named. Up to 8 Sleep Groups
can be created.
To exit setup, press the Exit Button [oval 17]. To continue Zone Setup, position the cursor next
to BACK TO ZONE SETUP and press the Set Button [oval 18]. ZONE SETUP PAGE 1 will
appear.
Figure 107 Camera Setup Screen
Camera Setup
Camera Setup is part of associating the different security and zone monitor cameras with the
keypads in Zone Setup. In ZONE SETUP BY NUMBER PAGE 2 a camera can be assigned to a
specific zone, for zone video or audio/video monitoring. In DOOR SETUP a camera can be
assigned to a specific door for door monitoring. Naming the cameras provides a reference to
which camera is connected to which Camera Video Input [pentagon 7] on the AVH21 Hub(s).
The camera name will appear in the KP21 Keypad Information Display [hexagon 13] when a
monitored zone or door has a camera assigned.
To name Cameras:
1. From ZONE SETUP PAGE 1, with the cursor next to CAMERA SETUP, press the Set Button
[oval 18]. The CAMERA SETUP screen will appear. (Figure 107)
2. Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to CAMERA. Press
the ◄/► Navigation Button [oval 16] to select the Camera to be Setup.
3. Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to NAME. Press the
Set Button [oval 18]. A white rectangle will flash to the right of NAME: indicating that the
remote can be used to enter the letters for the camera name.
4. Using either the ▼/▲ Navigation Button [oval 16] or the Alphanumeric Buttons [oval 46],
enter the first letter for the group name. (i.e. BABYS ROOM). When the first letter appears on
screen, press the ► Navigation Button [oval 16] to move the cursor to the next letter
position.
5. Repeat steps 2-3 above until the Camera Name has been spelled out. A Camera Name can
have up to 12 letters. Press the Set Button [oval 18]. This will store the name and return the
cursor to the arrow next to NAME.
6. Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to MONITOR CAM.
Press the ◄/► Navigation Button [oval 16]
to select YES/NO. YES = Camera can be
monitored independently without being assigned to a keypad (Zone). NO = Camera can only
be monitored by selecting the keypad (Zone) it has been assigned to in the MONITOR Menu.
7. To setup additional cameras, press the ▼/▲ Navigation Button [oval 16] to position the
cursor next to CAMERA. Press the ◄/► Navigation Button [oval 16] to select another
camera.