User's Manual

148
KP21 REAR PANEL FEATURES
Figure 82 KP21 Rear Panel (Bezel Attached)
1. Keypad Mounting Screw Holes
5. Bezel Snap Tab
22. IR IN Terminal
23. AVH Hub Terminal
24. Speaker Terminal
25. Keypad Address DIP Switch (Side)
26. Zone Right Channel Preamp Output
27. Zone Left Channel Preamp Output
28. Zone/Keypad Amplifier
29. Local Source Right Channel Input
30. Local Source Left Channel Input
31. Power Terminal
32. Keypad Bezel
KP21 REAR PANEL FEATURE DESCRIPTIONS
1. Keypad Mounting Screw Holes: 4, circular openings used to attach the keypad two a 2-
gang electrical box using the four included mounting screws.
5. Keypad Bezel Snaptabs: 2, plastic tabs, protrude from either side of the KP21 and snap into
slots on the back of a KP21 Bezel to hold the screwless bezel in place.
22. IR IN Terminal: 1, three-position plug-in terminal for connects to the included KP21/IR Pigtail
Connector for connection of an external IR sensor. Provides line-of-sight control from an IR
remote when the KP21 is positioned behind the user’s seating location.