Instruction manual

-- 47 --
Tops - Series
5.2 PRESET
Controls the high-speed dome camera’s preset capability. The Preset capability allows
the user to automatically move the camera to a pre determined location.
1) Duration – Sets the dwell time.
2) Preset position numbers – Each preset has a number assigned.
3) Set – Press this button to a preset location.
4) Clear – Deletes preset location.
5) Move – Moves to preset location.
6) Preset Tour – Automatically moves to preset location in sequence.
1)
2)
3)
4)
5)
6)
7)
8)
9)
5. PAN/TILT CONTROL MODE