Instruction manual

-- 42 --
Tops - Series
4.11 SHELL
This mode enable the user to : restore and fix the DVR when windows launches, uninstall
the DVR program, check network setting, check the HDD and shutdown.
1) Explorer - Run ‘Windows Explorer’.
2) DVR Doctor - Restore any corrupted data if any problems occur with DVR.
3) DVR - Enter DVR mode / Start recording.
4) Configuration Setting – Setup the system configuration.
5) System shutdown – Shut down the DVR system.
Data problem caused by Power failure can not be 100% fixed. Use of UPS equipment is
recommended.
It is recommended that In the event of poor quality video verify the quality of the video
source.
NOTE
1)
2)
3)
4)
5)
4. CONFIGURATION MODE